Ford Transit Mk6 Oil Sump Pan Alloy Diesel Engine 2.4 TDCi YC1Q6U003CE

The Ford Transit Mk6 Upper Engine Oil Pan Diesel 2.4 TDCi is an original part from the Oil Pans group, designed for Ford diesel engines. It serves as a precisely fitted base for the lubrication system, ensuring stable mounting and proper oil flow within the diesel engine.

Specifications and technical data

• SKU: YC1Q6U003CE
• Mark: Ford
• Condition: Used
• OEM Part Number: YC1Q6U003CE
• Substitutable numbers: YC1Q6U003CE, YC1Q-6U003-CE
• Fuel type: Diesel
• Category: Oil Sumps

Purpose and Function in the Lubrication System

The upper oil pan in a diesel engine is responsible for creating a sealed connection between the lower part of the block and the other components of the lubrication system. This is particularly important for diesel engines due to higher mechanical and thermal loads. Using a dedicated part for a specific Ford model helps maintain proper oil circulation, and consequently, stable pressure and adequate cooling of the components.

Choosing an original upper oil pan for a diesel engine minimizes the risk of leaks, improper fit, and unplanned vehicle downtime. This solution is especially crucial for commercial vehicles where predictable engine operation is paramount.

Benefits of Using an Original Ford Oil Pan

A part from the Oil Pans group, designed by the vehicle manufacturer, ensures:

• precise fit to the geometry of the diesel engine block,
• correct routing of oil channels and mounting points,
• compatibility with factory seals and accessories,
• stable operation of the lubrication system under typical operating conditions of a commercial vehicle.

This allows for predictable installation, minimizing the risk of additional modifications or adjustments. This is particularly important for fleet servicing, where consistency and ease of maintenance are key.

Characteristics of a Used Part

The offered upper oil pan is a used part, allowing for economical repair while maintaining the original manufacturer's specifications. This type of solution is often chosen for vehicles used intensively, where a reasonable cost-to-functionality ratio is crucial. A used OEM component retains its factory geometry and mounting points, facilitating installation in place of a damaged part.

Before installation, standard servicing procedures are recommended, such as checking the mating surfaces, preparing for new seals, and verifying the cleanliness of the oil channels. This allows for the full utilization of the part's potential and reduces the risk of future leaks.

Selection and Technical Compatibility

The upper oil pan is designed for diesel engines and should therefore only be selected for diesel units that comply with the factory Ford specifications. When selecting, pay attention to:

• compliance with fuel type (Diesel),
• type and generation of the engine,
• mounting system to the engine block and accessories.

A correctly selected part minimizes the risk of installation problems and ensures proper cooperation with other lubrication system components, such as the oil pump or oil pickup.

Support with Selecting Used Parts

If you want to better prepare for purchasing components from the aftermarket and avoid common pitfalls when gathering parts for engine repair or modification, it's worth reading the practical tips in the article Buying Used Car Parts – Common Mistakes When Choosing Parts for Tuning. This is a helpful source of knowledge when planning investments in used components.

If you are planning a comprehensive repair or upgrade of the engine area in your Ford and need other parts from the same group, such as additional pans, covers, or lubrication system mounting elements, check the available parts in the Ford Oil Pans category.